[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Hi all, Could someone let me know how the wiring is routed from the master cylinder to the inside of the car (fuse box)? I am getting a little paranoid about this. I couldn't see any correct way to do it (I even lifted the fuel tank but was still stumped), so I ran it along the driver's side wheel well, and then straight to the master cylinder. It is secured to the wheel well, and then loosely tied to the hard brake line to stop it flapping around. I am still having visions of it catching on something at full steering lock, and ripping off either the brake line or the brake light switches. this despite the fact that I have tested it at full lock in both directions and have found no evidence of anything putting tension on the wires. The wires are encased in a duct hose and so cannot get chafed by anything. Thanks, Daniel ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org