[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T3] Crossbar linkage

<x-flowed>Swing arm from the Linkage Kit connected to the Joint then threaded-rod then, next Joint then the Throttle shaft arm on the Carb. My linkage-kit came with Throttle arms that I had to put onto the carb 
Bob



From: Heather Woltz <dopetoka@yahoo.com>
Reply-To: type3@vwtype3.org
To: type3@vwtype3.org
Subject: Re: [T3] Crossbar linkage
Date: Fri, 19 Sep 2003 15:42:28 -0700 (PDT)

Im not sure what you mean by this...


--- Robert Hornstein <rsh3585@hotmail.com> wrote:
> Heather Maybe I forgot to mention that the swing-arm
> that goes down to the
> ict

where on the carb?

on the passengers-side is abot 1-1/2 to 2 inches
> towards the centre-line
> of the engine the two sides are not the same.
> Once you get the car running Bring the tools that
> you used to adjust the
> linkage with you.
> Bob
>


 Thanks,
Heather


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org



_________________________________________________________________
High-speed Internet access as low as $29.95/month (depending on the local service providers in your area). Click here. https://broadband.msn.com 

</x-flowed>