[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Tue, 2003-10-14 at 19:41, tristessa wrote: > "Keith Park" <topnotch@nycap.rr.com> wrote: > >Any of you guys know which years bus Flywheel I need for my T4 conversion > >using a 2L 914 motor?? > > I'm not sure of the years, but you're looking for either a 210mm or 215mm flywheel. I seem to recall it being the '72-75 range. > > Keith, you let the cat out of the bag! =) > AND, you need the input shaft for the same transmission. Unless someone has come up with an adapter. The later T-2/914 pilot bearing is completely different in the end of the crank. I will take a picture of the difference in the main shafts tomorrow night. The T-2 mainshaft will go right into the T-1 trans. Just slightly longer in the pilot bearing portion. -- Russ Wolfe '66 FB MT '71 FB AT '65 Bug (not running) russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org