[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
"Dont'cha love it when a plan comes together?" David V. Nelson ----- Original Message ----- From: "Jim Adney" <jadney@vwtype3.org> To: <type3@vwtype3.org> Sent: Tuesday, October 14, 2003 11:10 AM Subject: Re: [T3] MPS update #2 > There are both shims AND it is also possible that there is a little snap ring > and/or washer missing, down under the felt pad at the top of the shaft. AHA! I found that it was out of position and re-installed that wayward ring. Better but still a little sloppy. > Note also that there is supposed to be a small spring under the distributor, in > a recess in the top of the dist drive gear. If this spring is there, then the > dist shaft will always get displaced upward to that end of its play. The play > itself is not a problem as long as the shaft position is consistent. If that > spring is missing, the shaft can bounce up and down and produce erratic output. Still intact,this is. > > > -- > Jim Adney > jadney@vwtype3.org > Madison, WI 53711-3054 > USA > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > >