[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [T3] Drilling and tapping steering knuckle

To: type3@vwtype3.org
Subject: RE: [T3] Drilling and tapping steering knuckle
From: Jim Adney <jadney@vwtype3.org>
Date: Wed, 26 Mar 2003 14:51:08 -0600
In-reply-to: <532AA6A6542BD311BD02009027620DCA02746FCB@CKHSMAIL1>
List-help: <mailto:type3-request@vwtype3.org?subject=help>
List-post: <mailto:type3@vwtype3.org>
List-subscribe: <mailto:type3-request@vwtype3.org?subject=subscribe>
List-unsubscribe: <mailto:type3-request@vwtype3.org?subject=unsubscribe>
Old-return-path: <jadney@vwtype3.org>
Priority: normal
Reply-to: jadney@vwtype3.org
Resent-date: Wed, 26 Mar 2003 12:51:30 -0800 (PST)
Resent-from: type3@vwtype3.org
Resent-message-id: <Xx7iRC.A.DzF.RLhg-@cedant5>
Resent-sender: type3-request@vwtype3.org

On 26 Mar 2003 at 12:08, Vlach, Joe -CKHS wrote:

> I have access to the helicoils and insert tool. Also, the school I work at
> has a pretty good setup for machining.
> 
> I could drill this out and use the helicoil to repair, is it a M8?

Yes, M8 x 1.25

-- 
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
USA

-------------------------------------------------------------------
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org

References:
- RE: [T3] Drilling and tapping steering knuckle
  - From: "Vlach, Joe -CKHS" <JoeV@cksd.wednet.edu>

Prev by Date: Re: [T3] removing wiper arms
Next by Date: RE: [T3] Drilling and tapping steering knuckle
Previous by thread: RE: [T3] Drilling and tapping steering knuckle
Next by thread: RE: [T3] Drilling and tapping steering knuckle
Index(es):
- Date
- Thread