RE: [T3] Drilling and tapping steering knuckle

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

RE: [T3] Drilling and tapping steering knuckle

To: type3@vwtype3.org
Subject: RE: [T3] Drilling and tapping steering knuckle
From: "Vlach, Joe -CKHS" <JoeV@cksd.wednet.edu>
Date: Wed, 26 Mar 2003 12:08:01 -0800
List-help: <mailto:type3-request@vwtype3.org?subject=help>
List-post: <mailto:type3@vwtype3.org>
List-subscribe: <mailto:type3-request@vwtype3.org?subject=subscribe>
List-unsubscribe: <mailto:type3-request@vwtype3.org?subject=unsubscribe>
Old-return-path: <JoeV@cksd.wednet.edu>
Resent-date: Wed, 26 Mar 2003 12:09:47 -0800 (PST)
Resent-from: type3@vwtype3.org
Resent-message-id: <ifgJJ.A.Z6.Lkgg-@cedant5>
Resent-sender: type3-request@vwtype3.org

I have access to the helicoils and insert tool. Also, the school I work at
has a pretty good setup for machining.

I could drill this out and use the helicoil to repair, is it a M8?

Joe

-------------------------------------------------------------------
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]