[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Fri, 2003-03-14 at 19:37, phil cain wrote: > To remove the hose from the fuel injector, gently lock > it in a vice, take a hacksaw cut verticly along the > side of the metal cup, not to cut the pipe coming out > of the injector, after the cut down the side peel the > metal off, replace the hose with a new piece and a > clamp. replace both large and small "O" rings. Phil > I usually just use the wheel on my bench grinder to gently grind through the metal ferral <sp>. Then peel it off. -- Russ Wolfe '66 FB MT '71 FB AT '65 Bug (not running) russw@classicvw.org http://www.classicvw.org ------------------------------------------------------------------- List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org