[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>That said, did they tell you exactly what they couldn't get into spec? Yes. Left front: Camber 0.7 was 0.2 Caster 2.7 was 2.7 Toe 0.30 was 0.12 Right front: Camber 1.8 was 2.1 Caster 1.2 was 1.2 Toe 0.31 was -1.51 That was as close as they claimed the could get the camber on the right side. The tech did recommend I go to a VWFLAPS, as they might have replacement bug beams available... so perhaps he *was* treating it as a bug. Doesn't explain the off kilter camber... Though... I recall thinking (several months ago) I may had inadvertently reversed one of the rubber grommets that help affix the beam when I installed it, but when I got under the car it looked fine to me... this is something I will RE-check. Maybe I need to pull the beam to check proper. Thanks, Curtis C.Rochambeau 327/1600 http://binauralaboratories.net ~electronic manipulation's our specialty~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org