[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Front Beam [T3]
>That said, did they tell you exactly what they couldn't get into spec?
Yes.
Left front:
Camber 0.7 was 0.2
Caster 2.7 was 2.7
Toe 0.30 was 0.12
Right front:
Camber 1.8 was 2.1
Caster 1.2 was 1.2
Toe 0.31 was -1.51
That was as close as they claimed the could get the camber on the right side.
The tech did recommend I go to a VWFLAPS, as they might have replacement bug beams
available... so perhaps he *was* treating it as a bug. Doesn't explain the off kilter
camber...
Though...
I recall thinking (several months ago) I may had inadvertently reversed one of the rubber
grommets that help affix the beam when I installed it, but when I got under the car it
looked fine to me... this is something I will RE-check. Maybe I need to pull the beam
to check proper.
Thanks,
Curtis
C.Rochambeau 327/1600
http://binauralaboratories.net
~electronic manipulation's our specialty~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org