[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>Bentley, 9.23, has an arrow pointing at the inner door as plastic sheet >location. If so, >wouldn't it very difficult to get the plastic high enough up there? Also, >wouldn't water >coming in through the window channel, which is between the plastic and the >door >panel, get the panel wet? The sheeting is just attached to the inside of the door from below the window opening to the bottom of the door covering the entire access area (and the same shape as the door panel). The window channel allows water between the inner an outer door skin, but the plastic covers the opening and protects the door panel. I don't know if this helps but it is layered like below: Outside of door |channel/window |inside door |plastic sheeting |door panel Jason Smith 71 Square FI AT Columbus, OH USA http://jasontsmith.tripod.com/vw.htm ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org