[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
I think 3M makes an adhesive stuff in a tube specifically for this type of gasket...I think it is just called weatherstrip adhesive.... -----Original Message----- From: Gary Gamboa [mailto:gary_gamboa@hotmail.com] Sent: Tuesday, July 08, 2003 9:12 AM To: type3@vwtype3.org Subject: Re: [T3] Door Rubber I assume the little clip that holds on the curved door brace needs to be removed to slip on the new square part of the new rubber. Also, I know I've seen it here before, but what type of glue should I use? Thank you, Gary Gamboa >From: Jim Adney <jadney@vwtype3.org> >Reply-To: type3@vwtype3.org >To: type3@vwtype3.org >Subject: Re: [T3] Door Rubber >Date: Mon, 07 Jul 2003 10:48:27 -0500 > >On 7 Jul 2003 at 10:24, Gary Gamboa wrote: > > > I'm finding that removing all the prior door rubber glue very time > > consuming. Do I really need to get down to metal? If so, which tool >proved > > best in past experience? > >You really only have to get all the old rubber off, plus any large lumps of >glue. I've used a putty knife or a wide screwdriver. > >-- >Jim Adney >jadney@vwtype3.org >Madison, WI 53711-3054 >USA > >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org > _________________________________________________________________ MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. http://join.msn.com/?page=features/virus