Re: [T3] Interior Glue

[Scott Taylor <scottbtaylor@earthlink.net>]

<x-flowed>On Thursday, July 3, 2003, at 08:27  PM, Jason Weigel wrote:

> Because its so hot and dry the glue sets very fast. I had to hurry up 
> and bond the two pieces while
> it was semi wet. All Im gluing is carpet and pad.

I've found that if either side is wet at all it all falls apart. Try 
letting it dry completely--like 15 min. to 1/2 hour--and then use a lot 
of pressure when you install. Any of the 3M automotive spray glues 
should work fine for carpet.

good luck,
Scott
62 343, 65 361

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org

</x-flowed>