[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 25 Feb 2003 at 14:24, Daniel Baum wrote: > On the same subject, how high does the rear of the car need to be lifted to take > the engine out? When I remove an engine, I let it all the way down to the floor and then slide it out from under the car. That way the clearance I need under the rear valence is just the height of the engine, which IIRC is about 2 feet, or 60cm. I'll have to double-check this figure, but you can measure it in the car. I can do this with just jackstands, under the outboard ends of the rear torsion bars. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org