[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 19 Aug 2003 at 11:59, Jacob Schroeder wrote:
> >The original piece here had a special plastic hooked rib molded onto the
> >headliner material. This is just a small triangle of headliner stuff with
> >about10" of the white rib attached.
> Yeah, I definately don't have that ... i just have the TMI headliner kit
> >Yes, the metal is too stiff to bend and was not intended to. If you don't
> >have
> >the original parts you will probably have to wrap the headliner material in
> >there and glue it into position.
> That's for sure, this sounds like it could be quite difficult, any advice
> besides using a clean putty knife to push the headliner material in there
> once the contact cement has started to firm up?
I hadn't thought of a clean putty knife. Sounds like a good idea to me.
--
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org