[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
It should be in the key cylinder itself. More than likely it's a broken spring. Take It apart, lube it up, and replace the spring (you can get springs at home depot). -Ben -----Original Message----- From: . : orntar : . [mailto:orntar@orntar.net] Sent: Monday, August 18, 2003 1:48 PM To: type3@vwtype3.org Subject: [T3] ignition switch problem on my 70 squaerback, when you turn the key to start the engine it will not snap back to the on position by itself, you have to manually turn it back and sometimes turn it off. on 70, there is 2 peices; the key cyl, and electrical switch, right? which one of these has the spring for turning it back to on? if its the cyl, can i get a bug one? the west coast metric catalogue lists it as 113-853 -- nathan http://www.orntar.net/project/vwt3.html 1970 fastback ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.504 / Virus Database: 302 - Release Date: 7/24/2003 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.504 / Virus Database: 302 - Release Date: 7/24/2003