[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
These are female-female elbows. The hose I used was small enough wall to get through the grommet part of the old vent hose. I suppose there may be smaller elbows with an OD closer to 12mm which would do a better job if they still fit the nipple on the filler pipe. I think a threaded end would be larger OD than is ideal, but I've not tried the elbow route myself. > 19mm = 3/4" > 16mm = 5/8" > 8mm = 5/16" > 4mm = 5/32" > 2mm = 5/64" (think of Allen wrenches here) > > Other than the first one, notice the pattern? > 3mm isn't far off 1/8" for most purposes, which fits the pattern - reassuring! Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org