[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> -----Original Message----- > From: Jim Adney [mailto:jadney@vwtype3.org] > It might matter, if you were getting a shock from a part of the dist that > should be well insulated. I'm usually careful to avoid the wires at the > top, > where the high voltage is, but if everything is in good shape there, you > should > not get a shock off anything. I sometimes get shocked when I am turning the tightening nut on the dist clamp. Always when the wrench got too close to the green wire from the coil to the dist. I assumed it was coming thru that wire (high voltage or something), it has no cuts in the insulation or frays. nathan http://www.orntar.net/project/vwt3.html 70 fastback ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org