[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Fri, 2003-08-01 at 20:15, Steve Friedeck wrote: > The original case is from a 66, T00 I think, and the > replacement case is a U00. The flywheel pressure plate > and clutch are the 200mm ones. > All T-3's were 200mm clutches, what I need to know is how many teeth does it have around the outside for the starter. 6V had 109 teeth, and 12V had 130. Look on the crankshaft side, and where it fits over the crank, see if there is an o-ring in there in a groove, or is there a groove for an o-ring. If there is no groove, you probably take the steel gasket. -- Russ Wolfe '66 FB MT '71 FB AT '65 Bug (not running) russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org