[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>>the "pressure" sensor should actually connect to intake vacuum and should never see any "pressure" greater than 1 atmosphere, which would read zero on most gauges.>> What I should have stated is I hooked my vacuum gauge up to the vacuum pressure sensor's hose; rather than pressure I was reading vacuum. >>your "pressure" sensor to the fuel rail? It SHOULD connect to a nipple on the intake air regulator. That nipple points to the left and comes out of the center bottom of the intake air regulator.>> I checked this last night. Yes, it's attached to the driver's side of the intake regulator. Right under the two intake manifolds, correct? I thought this was the air intake distributor? Anyhow, it's still giving me trouble :( Joe -- ------------------------------------------------------------------- List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org