[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> Nice photos showing lots of perseverance and good work. It's always a pleasure > to see your progress, Daniel. Thanks! > I was interested to see your photo of the AT/dual carb only center carb > linkage. I'd never seen that before. It appears that you are missing a spring, > at least in that photo. Do you have what you need? If not, it looks like the > same spring from the AT FI throttle assembly might work there. > > Do you need one? If so, I have one and I suspect there are others out here, > too. > Wow, you're observant. Yes, I believe there is a spring missing. It is shown in the picture in the Haynes manual. If you have something that you think would be suitable then yes, I would like one. You probably also noticed that one of the ball-joints broke and someone replaced it with a bolt. I would probably replace the whole assembly - it wobbles a bit too - but I've never seen one, other than mine. It does work OK though, as far as I can see, once it's adjusted. Regards, Daniel Baum 1969 Type 34 automatic Email: daniel@type34.info Homepage: http://www.type34.info ------------------------------------------------------------------- List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org