[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> The relay for the cold start valve. I think the manual said > it's suppose to be located on the passenger side firewall; > however, it is now located above and aft of the starter. I'm still confused on which relay this is, I guess we'll have to wait for someone to chime in. >I > tried pulling the hose off the cold start valve, but it was > really on there and I didn't want to break anything pulling > too hard, but I'll give it a try tonight. Make sure you loosen the hose clamp, you have to remove the air cleaner to get in there. You could also remove it at the connection to the fuel rail then add another blocked hose to the rail, I used to attatch my fuel pressure gauge at this position so I had a way to always check the pressure. > I don't remember anything regarding the starter wiring, but > perhaps that was Jim's advice to another member. I tried to > get the correct wiring from the manual, but for some reason I > couldn't locate the specifics. I searched the posts and he mentioned it but did not give the proper wiring. I'm sending you the FI manual that Greg prepared in pdf maybe that will help. Jason Smith 71 Square FI AT http://jasontsmith.tripod.com/vw.htm ------------------------------------------------------------------- List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org