Re: [T3] '63 Squareback brake problem

[Jim Adney <jadney@vwtype3.org>]

On 29 Sep 2002, at 19:47, Nathan Jacobsen wrote:

> I believe the '63 shares the design of the '64/5 but is slightly smaller
> bore wheel cylinder. If so, it is possible that the seals have been
> replaced with ones that are too large, and causing the cylinder(s) to
> stick.

For some reason the wheel cylinder bores (as well as the MC bores) are in 
inch dimensions, in 1/16" increments. I don't think anyone couldput in one 
that was 1/16" oversize without realizing the error.

OTOH, disk caliper bores are metric. Go figger....

-
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
USA

------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/