[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>>Is there any way to remove the fan pulley while the engine is still in the
>>car?
>
>I made a simple piece that indexes on several of the pulley lobes and slips
>over the large round tube ("handle") that comes off of the fan housing and
>the breather box. On the early cars this engaged a rubber mount on the
>body. Anyway, I cut mine from a piece of 3/4" thick birch plywood.
OK, It was only 5 minutes. Go here:
http://mywebpages.comcast.net/jaransonT3/PulleyLock.jpg
to see my version of the pulley lock. It was quick and dirty, but worked
great. I think Toby Erkson made a steel one that was much nicer. There
might be pics on his webpage.
Hop this helps.
Later,
John Jaranson
'71 FI AT Fasty (Jane)
'66 Square (Sophy)
About Half a Late Square (Organ Donor)
http://mywebpages.comcast.net/jaransonT3/jaransonT3/ (This is my new
website address)
------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/