Re: [T3] horn circuit

["cesaro suma" <cesarosumability@hotmail.com>]

<x-flowed>well, i think i have most of it figured out. all of the previously 
mentiopned wires are there. but the one from the coupler, in the car, goes 
nowhere. here is a pic of what i have.

http://home.att.net/~howelln/fuji001.jpg

yes the previous owner cut an access hole in the column head, i don't know 
why, but its helps for the current problem. the brown wire danglking down is 
coming from the coupler in the column head. but all of the wire positions in 
the multi-plug are taken up. if i touch the brown wire to the far right wire 
(brown/white-stripe)in the plug it will sound (with the horn ring pressed 
down of course). so is there something amiss other than the hack job thats 
been done? how can i get these wires connected and still be able to remove 
the turnsignal assy, or the multi-plug?

c



> The ground wire returns from the horn and connects via an insulated bearing
> to the steering column shaft, which is electrically floating.


_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com


------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/
</x-flowed>