[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 5 Sep 2002, at 18:18, Russ wolfe wrote: > On Thu, 2002-09-05 at 08:56, Jim Adney wrote: > > BTW, I made a sleeve to center the fan housing to the case many years ago. > > Does anyone else bother with this? > > > The factory had a tool to do this. I don't have one of these tools, but > with care, you can use a T-1 crank pulley to align it, and get a couple > of the 6mm bolts in. You could also make one from the center hub of a > bad T-3 fan. Drill out the rivets. I have a photo of the factory tool, but mine is MUCH simpler. I don't think the pulleys or fans would help much because they are really quite a bit smaller than the hole in the housing. I just used a lathe to turn a sleeve that had a step in it. The small part JUST fits in the case, and the large part JUST fits in the fan housing. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/