[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 23 Oct 2002, at 13:50, John Fischer wrote: > what is the process to remove and install a new speedo cable ? Remove the cotter pin or circlip under the hubcap. Pull the cable out of the steering knuckly from the inside. Reach under the dash and unscrew the retaining ring that holds the cable to the speedo. Pull the cable out of the speedo. Pull the cable out thru the firewall from inside the car. Installation is the reverse. Take care to thread the cable thru the grommet in the inside fender wall. Getting the cable back in the speedo may require trial and error to get the inner wire lined up. This is all a bit more difficult than it sounds like it should be.... - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/