[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
here is something i've done with good sucess. get some hose about 5/8" inside diameter, a foot should be fine.make sure it is fuel resistant hose!!! open fuel door and remove the splashshield. looking at the fillerneck the overflow tube is in the 9:oclock position.take the hose off at this connection. open the trunk and look for a rubber hose that attaches to the tank vent. i started with the fillerneck end first then threaded it like the origional through the bulkhead and attached it to the tank using hoseclamps at both ends.i had to leave an extra long "loop" to make it go through the bulkhead at the right angle. it sounds a lot harder to do than it is really... alex sundberg doctor to daughters 71 square "eki" __________________________________________________ Do you Yahoo!? Faith Hill - Exclusive Performances, Videos & More http://faith.yahoo.com ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/