[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 26 Nov 2002, at 9:51, Vlach, Joe -CKHS wrote: > Please elaborate Jim on "this is the way that you really SHOULD adjust > either torsion bar." All the torsion bars have a different number of splines on each end. By moving the torsion bar up one notch on the inner end and down one notch on the outer end you can make the fine adjustments you need to get the alignment right. All this is well explained in the Bentley manual. This is all rather irrelevant to the concept of lowering, because the interest there is seldom in small increments, nor in careful accurate alignment to any particular spec. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/