[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
> 1) the 2.5K TS is reading around 3.9. Should I > replace it? Bentley seems to > say that more resistance than spec is ok. You're fine here. > 2) the 300 ohm one is reading at over 600. You're probably fine here, too. These readings are strongly temperature dependent. > 3) I opened up the pressure sensor and found > that there is a lot of oil in > it. Is motor oil used as a lube in pressure > sensors? I overfilled my air > cleaner a little and think that might have been > the result. Yes, that's what happened. Proably no harm done. Just drain it out and reinstall. And drain out any excess oil from the air cleaner. > 4) Also, I found that the two coils in the > pressure sensor were reading > 322/88 instead of 350/90. I would replace Nah, you're fine here, too. How's your car running? -Mark Fuhriman '69 Fastback ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/