[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Vented Front Disc Brakes


<x-charset iso-8859-1>Greg,
Sounds reasonable enough.  The reason I asked is that the only difference
between A2 Golf (non-vented) and GTI (vented) front rotors are the rotors (a
little thicker for the venting) and the pads (a little thinner to make up
for the rotor thickness.)  I was wondering if this Type 3 setup was the same
way.

Jimbo
----- Original Message -----
From: "Greg Irick" <gregi@vwtype3.org>
To: <type3@vwtype3.org>
Sent: Saturday, May 04, 2002 1:47 PM
Subject: Re: [T3] Vented Front Disc Brakes


> Jimbo,
>          The company that makes the setup has machined spacers for the
> calipers to widen the space between the brake pads so that you can use the
> vented rotors.  I also read on the ad that this increases track width by
> 5mm per side which is a small amount for the increased fade resistance
that
> you will receive with these brakes.

-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe

</x-charset>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]