[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 18 Mar 2002, at 17:01, ORNTAR@att.net wrote: > I have searched the website and found that you have to remove the coverplate > under the car to change the coupler. I could not do this because i could not > remove the plate. is it just stuck or does it run atop the tranny therefore > pinned to the frame? I should it just come off after the screws are removed? > Mine is very stuck, i couldn't even wiggle it. any ideas? There is a rubber gasket in there that the cover sticks to. Just pry it off carefully so as not to tear the gasket. Yes, they can be pretty tight, but once you get the 3 screws out there's nothing else holding it. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org