[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 30 Jun 2002, at 20:39, Ben Doughney wrote: > I had the muffler off today to weld it up for the warrant of fitness and > while I was shaking the muffler around to get it off, I noticed that the > engine moved up and down by about an inch. The crossbar at the back of the > engine wasn't moving with it though, I am wondering if it could be loose. Do > they just bolt directly to the case? Do I need to take the whole fan assembly > off to get to the bolts? The crossbar bolts to the case with 3 bolts. I think you can get to them with some difficulty with the fan installed. Use an open end wrench; the lower bolt is smaller than the 2 upper ones. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/