[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 20 Jun 2002, at 20:57, KRAWL@aol.com wrote: > One of the two bolts behing the fan have come loose, I was attempting to > fix this with the motor in but I dont know how to get the pully off. I got > to that point and have no clue how to get the nut loose, I have the proper > size socket and all of that but no matter what ive tried it wants to turn > over. If this is an AT car, you can get someone to jam a big screwdrive in the ring gear from below while you undo that bolt. If this is an MT car, put it in gear. If that doesn't work, get the wrench on it and have a friend turn the engine over quickly with a starter. BE VERY CAREFUL with this approach. Watch where the wrench will drag your hands if the bolt doesn't break loose. BE VERY CAREFUL! Done carelessly, you could lose some fingers. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/