[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>According to the Weber tech manual.... "6.5mm to 7mm away from the base of the carb cover with the gasket properly attached" Drake 72 Square (stock) 63 bug (darkside) San Jose, Ca. ----- Original Message ----- From: "D&L Walters" <waltee@prodigy.net> To: <type3@vwtype3.org> Sent: Thursday, June 20, 2002 12:16 PM Subject: [T3] Weber Specs?? > Good rainy afternoon, I had a quick question. Just was going over the > Notches 34 ICT's on the back porch, my pair didi not come with any (read > "NONE", thanx "F" Freddy) specs. Does anyone have the float setting for > these carbs (the distance from the upper carb half to the float, I think > it's with the half turned upside down?) Should be in the neighborhood of 6 > mm. or so if I remember correctly. Anyone? Thanks in advance, > David Walters > '73 1600 L Notchback > S. FL, USA > > > ------------------------------------------------ > To unsubscribe, E-mail to: <type3-off@vwtype3.org> > For more help, see http://vwtype3.org/list/ > ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/ </x-charset>