[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 30 Jul 2002, at 12:59, thorkhild@sympatico.ca wrote: > I'm putting the fi system back on my fasty after years of driving w/ dual > webers. I've got the bently wireing diagrams but they don't show how the fuel > pump is wired to the system. I do have some real snags to my plan. the system > is the early 68-69 system. But I don't have teh correct aux air regulator that > holds the temp sensor. nor do my heads have the provision for the cylinder head > temp sensor. For the head i'm going to find a decent location to tap. As for the > other , I'm not sure, unless i can find a the correct aux air regulator. There were only 2 AARs, the MT one with the coil spring in the crankcase, and the late AT version that is electrically heated. To install the temp sensor there you just need to remove the front case stud so you can screw in the sensor. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/