[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Thanks for all the good advice ! -----Original Message----- From: type3@vwtype3.org [mailto:type3@vwtype3.org]On Behalf Of John Fischer Sent: Sunday, July 28, 2002 1:50 PM To: type3@vwtype3.org Subject: Re: [T3] Will This Bumper Mount Tow assembly work ? I found a dolly to rent for a month for $215 cheers john -----Original Message----- From: type3@vwtype3.org [mailto:type3@vwtype3.org]On Behalf Of Todd Sent: Sunday, July 28, 2002 12:26 PM To: type3@vwtype3.org Subject: Re: [T3] Will This Bumper Mount Tow assembly work ? Assuming no rust on a showroom new type 3, you *may* be able to tow it without major damage or falling apart, if you're lucky. But you still end up with ugly holes in a rare bumper, and will have some amount of bending in a place not designed to handle those forces. If you can afford $115 plus shipping for a tow bar, go to a place that builds & repairs trailers, and have them weld up a simple bar that will go under the car and clamp around the beam instead. RV shops probably would have good suggestions too, and could sell you a wiring harness to hook up the lights. __________________________________________________ Do You Yahoo!? Yahoo! Health - Feel better, live better http://health.yahoo.com ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/ ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/ ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/