<x-flowed>At 8:53 AM -0400 7/21/02, Iamkeen@aol.com wrote:
Thing is, I can't get my CV's undone, because 4 out of 6 bolts on each side are completely stripped out - the holes are nearly perfectly round. Now, I realize this condition is the result of sloppy tool use in the past - but that's just a symptom. The root problem is, there's these whimsical
Did you or a previous owner think that these were standard socket head ("Allen") screws and try to remove them with the regular tool? I believe these are usually "Torx" head screws, and need a special little tool (more of a star, rather than a hexagon) to remove. Putting the Allen key in one of the Torx bolts will strip the bolt head...
-Greg ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/ </x-flowed>