[T3] Tucking wheels

[Ryan Langley <rlangley@mac.com>]

<x-flowed>I have a 66 fasty and want to put in a set of 5-spokes polished Empis 
that are running 195/sr60 87H on the back and 195/sr60 86H on the front. 
My problem is they stick out to far. How do I tuck them in? I need to 
put 4 to 5 lug adapters to run them and that will add an extra 1/4 inch 
to the depth as it is. Any suggestions?
Ryan
On Wednesday, July 17, 2002, at 01:40 PM, Micah wrote:

> that was the reading while engine was at medium to high rpm.
>
> I will retest when new reg. is in.
>
> :-)
>
> Micah
> ----- Original Message -----
> From: "Jim Adney" <jadney@vwtype3.org>
> To: <type3@vwtype3.org>
> Sent: Wednesday, July 17, 2002 6:21 AM
> Subject: Re: [T3] temp. sensor query..
>
>
> > On 16 Jul 2002, at 12:46, Micah wrote:
> >
> > > The reading was a steady 12.4
> > >
> > > So, That would be the voltage regulater than, aye?
> >
> > That sounds like the normal voltage when the engine is idling. Did you
> take
> > this reading while idling, or at a medium (2000-2500) RPM?
> >
> > If this was at medium RPM, then, yes, replace the VR with a genuine 
> > Bosch.
> >
> > -
> > Jim Adney
> > jadney@vwtype3.org
> > Madison, WI 53711-3054
> > USA
> >
> > ------------------------------------------------
> > To unsubscribe, E-mail to: <type3-off@vwtype3.org>
> > For more help, see http://vwtype3.org/list/
>
>
> ------------------------------------------------
> To unsubscribe, E-mail to: <type3-off@vwtype3.org>
> For more help, see http://vwtype3.org/list/


------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/
</x-flowed>