[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Too low to jack up?


<x-flowed>Put the jack stands under the torsion tubes. Place the stands outboard as much as possible for stability. When you jack the car up make sure you are jacking it from a proper location. With low cars this usually is a pain in the arse. If the stock jack mounts are there you can use it, Or you can jack it up by the rear shock mount (one side at a time obviously).

Drake
72 square (stock)
63 bug (darkside)
San Jose, Ca


My Squareback is somewhat low in the rear. I need to replace the battery cable, therefore, I need to get to the starter. I was going to get some jack stands. Where should I place the stands? Thanks.

P.S. If you can't tell, I'm fairly new to cars (or at least working on
them).


_________________________________________________________________
Join the worldâs largest e-mail service with MSN Hotmail. http://www.hotmail.com



------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/ </x-flowed>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]