Re: [T3] Gearbox input shaft seal

[Hal Sullivan <tristessa@pon.net>]

<x-flowed>At 05:00 PM 7/3/02 -0600, Brian wrote:
> jim, it isn't that involved...put the disk in tighten clutch down enough 
> to hold disk, but still move it... use socket/extension to line it 
> up...tighten down and put in the motor.  never, ever had  a problem with it.

Jim A, I'd suspect that Brian means the socket is what fits in the gland 
nut/disc spline area with the extension as a handle.  Seen it done once or 
twice, but never done it myself (see my other post...)



------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/
</x-flowed>