[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 3 Jul 2002, at 11:07, Henrik Larsson wrote: > There appears to be a slight leak from the gearbox input shaft seal and > I'm going to replace it. The question is: How do I get the old seal out? > The Bentley shows a strange looking special tool, but is there an > alternative way to remove the seal? I think you might be able to use a standard seal hook, or even a (bent?) screwdriver under the outer lip. Note that VW introduced a different seal in about 66 which has a double lip. You can probably use a late one, but the second lip won't touch anything unless you also replace the imput shaft. The down side of this is that it requires you to open the differential, the up side is that you then have a clutch pilot tool. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/