[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 2 Jul 2002, at 20:16, HBakr@aol.com wrote: > peace to all, my 70 FI square shakes and hesitates right around 1200-1600rpm. > This started after I replaced a leaky hose injector and washed the engine > bottom afterwards. So far, I have: > replaced the points & condenser > replaced the suspect injector with the original > cleaned FI trigger contacts > cleaned and replaced transmission ground contact Have you checked the cable harness contacts to the injectors? You have to be very careful about this, but you can take the connectors out of the connector bodies and check that they are actually tight on the injector pins. Tighten them up carefully if they are loose. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/