[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
on 2/7/2002 4:46 PM, Steven Ayres at comwest@att.net wrote: > Yes, it's not even particularly difficult. I use a 3/8" ratchet handle with > two short extensions on the plug socket. Loosen the plug, remove the handle > and top extension and spin the plug out by hand with the lower extension. > There's not a lot of room to swing the handle, so only use it for final > tightening and first loosening. (You don't want much torque on the plugs > anyway.) OK, I will go and have a look at the local engineering supplies. At the moment, my extension is too long, so I can't get it in there on the 3 & 4 side. I also need a new spark plug socket as well, they are useless with the rubber bit missing ;-). Thanks, Ben Doughney '75 1200L '63 1200 - Ringo '71 1600TL http://members.tripod.com/~superkafer/ ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/