[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>On Monday 21 January 2002 11:18, Greg Merritt wrote: > > > I'm not certain of the precise rotational orientation of the > outer lever vs. the inner lever. I think they're actually supposed > to be not quite parallel. One clue to this is Fig. 10-25 in the AT > chapter of my Bentley -- you can see that the flats on the inner end > of the shaft are a little bit rotated with respect to the outer > shaft. I think that if I'm off a little bit, I'll still be able to > adjust the cable. > > If anybody has a spare good lever & shaft for sale, please > let me know! Or, if you have one that you can just look at to > confirm that the inner and outer levers shouldn't be parallel, please > drop me a line. If you happen to be dropping your AT pan any time > soon, you can just look up into the tranny and compare lever > orientations. > If you need it Greg, I can pull the pan off my spare Automatic that is sitting in the garage, and look at the shift lever, or pull it out and measure the angle. Let me know. -- Russ Wolfe '71 Fastback AT '66 Fastback MT (IT DROVE) russw@classicvw.org http://www.classicvw.org ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org </x-charset>