[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>> I was wondering if > it would be possible to disconnect the balancing tube and use the outlet > from the Y connector as a vacuum take-off for balancing. Never heard of them being used. I'm surprised you can't get a Gunson Carbalancer from a UK car shop - not too pricey. My old Variant PO soldered two small pipes into the air-cleaner over the intakes to which a simple loop of clear polythene pipe can be fitted. I half-fill the U-shape with paraffin (kerosene) in case it gets drawn in, and I can check the balance both at idle and at higher RPM, under operating conditions with the air-cleaner attached. Best way of all, and the cheapest if you don't mind the small mod to the air-cleaner. Dave. UK VW Type 3 & 4 Club http://www.hallvw.clara.co.uk/ ------ ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe </x-charset>