[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [T3] ignition troubleshooting
- To: "T3 List" <type3@vwtype3.org>
- Subject: Re: [T3] ignition troubleshooting
- From: "Steven Ayres" <comwest@att.net>
- Date: Tue, 1 Jan 2002 21:57:13 -0700
- Organization: Comwest Communications
- References: <002101c1930f$1ac9f480$1916ed0c@plano1.tx.home.com> <006801c19320$354d9d00$bf50530c@stevenay> <004501c19328$6e45d610$1916ed0c@plano1.tx.home.com> <008b01c19333$556ce6a0$bf50530c@stevenay> <001901c19337$e2670050$1916ed0c@plano1.tx.home.com>
- Reply-to: "Steven Ayres" <comwest@att.net>
- Resent-date: Tue, 1 Jan 2002 23:58:31 -0500
- Resent-from: type3@vwtype3.org
- Resent-message-id: <"W5Nlf.A.IXD.3NpM8"@host32.cedant.com>
- Resent-sender: type3-request@vwtype3.org
<x-charset iso-8859-1>Jason=> Somewhere between the condensor
=> and the rotor I'm losing ignition.
Check that you have a good ground wire from the condenser to the breaker
plate. This is the fine braided copper one, usually from the nut holding the
condenser to the wall of the distributor. These often break from fatigue.
Steven Ayres, Prescott AZ
'66 Grosse Karmann
-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org
</x-charset>