[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>hello there.
you have come to the right place as you allready probably
know.
are your konis adjustable ?
i have the irs urethane bushes fitted and was expecting some noise from them
but it didnt happen!
they have been good bushes and should not need changing
a word of warning it is no mean feat to get these to fit i had to use 3
different lengths of bolts to drag the bush plate slowly onto the torsion
bar housing and was a bit concerned about stipping threads at a couple of
points .
take your time fitting these if you could i would suggest doing it over a
couple of days as this will let the bushes get used to the idear of where
they are going oil the bolts well.
i had a set of spax yelow adjustables on untill recently one of the bushes
is gone in one of the shox they could be set really hard when i wanted too
but my cd player didnt apreciate it i was very happy with these shox till a
bush went out .
ive now got coil overs on the rear in prep for a bit extra weight in the
form of a t4 lump and stock up front (bush in the front spax went) im gonna
look for a new bush for the front as for when the t4 goes in i need to
tighten the front end just a bit i still like my music:-)
take care all.
neil verdon 66 sqr on irs pan
off the speedo in germany
if i can.
soon to be fitted with
2ltr+t4 power!
-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org
</x-charset>