[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>How does one go about checking the flywheel to make sure it is not sprayed? Toby Erkson air_cooled_nut@pobox.com '72 VW Squareback 1.6L bored and stroked to 2.0L, Berg five-speed '95 VW Jetta III GL 2.0L, P-Chip, Jamex suspension, 2.25" MagnaFlow exhaust, etc. Portland, Oregon, http://www.icbm.org/ >-----Original Message----- >... Apparently someone, probably in Mexico, is resurfacing old >flywheels using sprayed metal, not on the clutch side but on the seal side. >This works OK for a short time, but soon the resurface starts to decay, >creating sharp edges of the sprayed metal. These are destroying front seals. ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe </x-charset>