[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [T3] Needle mixture meter
<x-flowed>Yes, as I sit here in the office I remember that 600 F was
the minimum operating temp on the haltech. I did wrap
the collector with exhaust wrap
out of paranoia, but didnt do b4 and after
so I don't know if it was necessary. Reading on the bus
is very stable, and indicated a very rich condition
on the weber DFAV, like to the last mark on the rich scale
(but that is a story for the type 2 site!)
I guess my indication that it is working properly is that you
can see it zoom over the entire lean-rich range when you shift, etc.
and also it detects my hesitations (which are lean!)
Jim Rustad
Kennewick WA
71 FI square
76 bus
From: "Jim Adney" <jadney@vwtype3.org>
Reply-To: jadney@vwtype3.org
To: type3@vwtype3.org
Subject: RE: [T3] Needle mixture meter
Date: Thu, 7 Feb 2002 11:14:31 -0600
On 7 Feb 2002, at 7:35, Erkson, Toby wrote:
> Sorry Jim, I know you know what a merged header is, brain-fart on me :)
That's okay. I thought it was a fair comment.
> I recall somewhere in the murky cobwebs of my mind that an O2 sensor
needs
> to be about 600-deg. F minimum (oh darn, maybe that was for the
catalytic
> converter...?). Also, for us at least, this is where a heated sensor
would be
> necessary I think.
Good point. I forgot about the possiblity of heated sensors, but I also
don't
know what temp they really need or whether the heated sensor would make
up any difference.
-
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
USA
-------------------------------------------------------------------
Search old messages on the Web! Visit http://www.vwtype3.org/list/
_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com
</x-flowed>