[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Parts identification


On Mon, 2002-12-23 at 22:47, Jim Adney wrote:
> On 24 Dec 2002 at 12:01, Ben Doughney wrote:
> 

> 
> Okay 311 905 205F is a 66 dual carb dist, but my US Bosch listing shows that 
> this should be a 0 231 137 005. By 67 this was a 0 231 137 015, so either 
> someone's made a mistake, or Aust type 3s got different dists (or there were 
> running changes in production.)
> 
> '66 type 3s got the same vac adv can (the -204) as I mentioned above. So these 
> should be interchangable. BTW, I looked at the 204 I have here and it has 204 
> in VERY small numbers on the bottom only. They are smaller than "normal," 
> closer to the vac can than "normal," and easily overlooked. I missed them 
> entirely when I first looked at it, and mine was NOS and clean.
> 
I just pulled the vac. unit off my 311-905-205E/0 231 137 007/ JUR4
distributor. I have been told that this is a 1965 twin carb t-3
distributor. This vac. unit has NO numbers on it. :=(

-- 
Russ Wolfe
'66 FB MT (It drove)
'71 FB AT 
'65 Bug (not running)
russw@classicvw.org
http://www.classicvw.org



------------------------------------------------
To unsubscribe, E-mail to: <type3-off@vwtype3.org>
For more help, see http://vwtype3.org/list/

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]